How To Paint/Dye Interior Vinyl & Plastic Parts – Mustang Tech (Fox Body, SN95 & S197)

How To Paint/Dye Interior Vinyl & Plastic Parts – Mustang Tech (Fox Body, SN95 & S197)

100 thoughts on “How To Paint/Dye Interior Vinyl & Plastic Parts – Mustang Tech (Fox Body, SN95 & S197)

  1. Yes it is. It is the key to helping the paint last and not having to come back to redo the job later.

  2. You use this paint method to repaint to different color. It is easier to go from a light color to a darker color. I would suggest you check out our website and look at some of our door panels before repainting a full door panel. Give us a call 1-866-507-8871

  3. I have some scratches on my dashboard and i wish to repaint them to remove those scratches, should i follow the same instructions that are provided in this video? and how can i tell the exact color of my dashboard? and what kind of paint should i choose for the job so it doesn't peel off or look off? thank you.

  4. Follow these process to properly paint your interior. The vinyl wrapped material on dashes needs to be painted with the vinyl and the hard plastic parts need to be painted with the Laquer. Feel free to call our customer service team to help you determine what color you need 1-866-507-8871

  5. funny thing is about these paint videos, your surrounded by rims and sometimes cars, aren't you worried about overspray ?

  6. hey man how can i unpaint my dash ? ….last owner painted it blue >:(ย  it looks horrible what can i use so i wont damage my dash ,, its a 96 mitsubishi eclipse

  7. Hi, great video, however i have a question – what if i want to make an interior part a bit glossy, should i put any lacquer coat on the paint and then polish it until i get results I am wanting, or it isn't necessary?ย 

  8. If your using your air from the shop compressor to blow of the water make sure the compressor has an oil separator installed on it. If not a small amount of oil from the compressor can be blow on your newly cleaned part and this can cause fisheyes in the new paint.

  9. Would I just have to do more coats if I wanted to do a red to grey or black? I think red interior in my 89 is hideous

  10. how many cans would you recommend to refresh all plastics and metals in the interior? Also will these sprays get tacky in the south texas heat?

  11. Do I have to use the laquoer paint for plastics will the vinyl paint work good ..I already ordered the cans of vinyl lol

  12. You guys at 5.0resto are rad i havent ordered parts yet but when i do you guys get my vote the extensive rezto vids are just what the stang Dr ordered keep up the awesome work ! (86 four eye 5.0 GT) ๐Ÿ˜‰

  13. Not certain about the points made but ,if anyone else wants to learn about learn how to spray paint cars try Barkola Spray Paint Blueprint ย ? Ive heard some decent things about it and my buddy got excellent success with it.ย 

  14. Some people scuff/sand and then paint without primer. Is that good enough for a thorough paint job?
    Is it either or… Like. Could you clean, prime, paint. or scuff and paint?

  15. Amazing, was trying to figure out a way to get new speaker grills for my 91 vert. Since they no longer make them and a friend suggested I just paint my original ones. I followed the instructions like I have with so many other Late model resto videos and nothing short of excellent. These guys really know there stuff and know how to make an old car look young again. I added a coat of primer in the mix but regardless my speaker grills look brand new. Thanks Late model resto!

  16. My meduim grey airbag is peeling , i got black spots on it, its a 99 silver stang , can i use this can to cover the peeled area, also i lost the passanger airbag vinyl part, i could find the same color at local junk yard i got a tan one, can i use this bottle to change the color ? It will looks the same as factory vinyl on doors and center console?

  17. Would a 93 ford pick up be the same way as that? and my dash is red but I wanna paint it black would I do the same process just with the black paint??

  18. While the armrest is out, you probably should reinforce it, cause those plastic break easy. ๐Ÿ™‚ layer of concrete or something.

  19. Keep making these videos. I don't have one of these Mustangs, but videos like this keep customers coming back. Keep up the good work!

  20. great job! I have a gmc truck 2004 which needs interior touching up…where do I purchase the correct color paint mainly dash board which is vinyl…thanks

  21. Titanium that was the color of the (then) brand new 90 Mustang GT I bought when I was 19 and it had the power mirrors. ๐Ÿ˜€

  22. why didn't you paint the grey plastic ย black or redย ย  come on man it doesn't even look different and this stuff is like 20 bucks a can

  23. Yeah,gloves might be a good idea, don't worry about contaminating the part,worry about contaminating yourself.A respirator may be a good idea also especially indoors.Thanks for the video.

  24. Why would you not spray an adhesion promoter on the hard plastic center console trim piece PRIOR to painting?
    Why did you guys stop carrying this SEM Ford Opal Grey spray paint in a can?

  25. "Don't leave it on too long, it WILL cause surface damage."

    As he is wiping it off with his bare hands lol.

  26. is it long lasting ie: what are long term effects of sunlight and heat and cold with painted plastic trim?

  27. Or you could scuff the parts with the Scotch Brite pad without the soap and water, wipe it with some wax and grease remover then tack it off with a tack rag and you are ready to paint.

  28. can u paint the airbag with these paints, want to get the steering wheel for my 92 lx, but mine is red

  29. Does the sun damage the paint if you paint the dashboard? I live in Florida and the heat its ridiculous. Lol

  30. Can you guys make a video on respraying a black front molding? The molding isn't detachable and is a part of the front bumper cover, unlike the side moldings.

  31. Hello good afternoon, I got a Mustang 1989 5.0 Coupe, how many cans you think I need to paint the seats and all the interior without dash,

  32. Of your going to do this do everything he said but when you wipe the pannel with the alcohol if you see anything on the rag it's not clean enough it will peal.

  33. What's best stuff to paint the interior trimming in me car (eg: shade visor , light fittings + more) some say dye some say plastic wrap paint ????

  34. How well does this paint hold up if you was to do a color change on the vinyl and plastics? ๐Ÿค”

  35. Sorry for a reply on a old video but i was wanting to use plasti dip on my interor do you hafto uave a air compreso for this to dry it of or can u use a towl or something

  36. How do you go about changing the oil dipstick tube…I have a 90 Fox gt..and the dipstick is broke where it bolts to the header want to replace it have the replacement got the chrome Ford racing one from LMR..thanks any help plz

  37. What's a good way to remove paint off plastic interior. I bought a 84 mustang, looks like the interior was tan, and the owner before painted it a bright red. It wasn't a good job as it's chipping, but want to bring back to stock. Any suggestions

  38. i know this is an old video, but another SEM paint job done incorrectly. if you read the instructions it clearly states to apply the sand-free first then apply color without letting the sand free dry. this process chemically bonds the paint to the substrate. don't know why every interior paint video leaves this out.

Leave a Reply

Your email address will not be published. Required fields are marked *