[자막/ENG] How to draw guns/김정기가 설명 해주는 총 그리는 법!

[자막/ENG] How to draw guns/김정기가 설명 해주는 총 그리는 법!


Now let me draw a gun, which you all hate to draw the most. It’s an automatic pistol. With this… You just need to draw it as if you’re drawing a banana. Either a banana or a Mars bar. Or Snickers bar! Just think of it as one Snickers bar stuck to another. It’s as simple as thinking of it as one Snickers, then sticking another one to it. The important part here is that this is a simple shape. (simple shape) Well, there are different ways of operation methods for a gun to work This is a blowback which should move like this. Just the top part. Let me draw it simply- Well~ One Snickers bar~ And then another Snickers bar, but instead of putting them together like this,
Because you need to grab it by hand, rather than drawing them straight Tilt it a little bit Tilt it backwards a little bit Just like this Do you get it? Do you understand? If you look at it from the top Not like drawing it downwards like this, Just like this. And then, now you can divide it into halves here. This part moves like this. For example, if it is pushed back Then you can see the muzzle here. And then here It’s the bottom part, not the muzzle. And what is it here? the trigger! It’s where the trigger is. And then, what do you think is going to be in here? That’s right. The magazine goes in. So you need to put the magazine to load with the bullets and shoot. And because we used a magazine here, the empty cartridge should bounce out and the warhead should fly, right? When you look at it from the top, there are many types of guns these days, but the ones with the top cut like this, When you look at it from the top When you look at the pistol from the top There are some guns that are cut widely like this. This is where the empty cartridges fly away. The empty cartridges fly out from here. Or~ The ones that are open only on one side It’s only two of these types. I just use these two types. For all these automatic pistols Well, if you zoom in this front part- It’s assembled in two ways. For an American pistol, Colt Commander When this goes back, the only things left are the muzzle and this front part. If you look at it right from the front, it should look like this. The muzzle and below that is where the gas goes in and out. It’s how it looks, but with the guns like Glock Glock is a gun made with plastic In that case, it looks simple. When you look at it from the front It’s this shape, or there are quite a lot of different shapes. This is the front sight. There are lots of shapes, but this is the most simple way to draw it. So here is the front sight and the backsight. Also, because you need to pull the gun Normally there is a hatched lines pattern. Or sometimes at the front.. It’s not really common, but there are some cases with people tuning their guns. Now let’s look at the back.. You should pull the breechblock backwards to load. There is this way to force the blowback. Now when you look at the back of the gun,
Old guns, same goes for some recent guns, but If you look at the back of some guns, When you look at the back, this is like something to make a clicking noise. What do you call this..? Is it a breechblock? Sometimes there is a breechblock that hits the firing pin (it is a hammer). Newer guns tend to not have this. It is just straight down flat. Without anything. You see old revolver guns? The ones from Western movies Those revolver guns definitely have this breechblock. The bullets don’t come out from here, but from here. Now what is this here? If you pull it here and tilt it, then it becomes like this. To put the bullets in So that you can pull it sideways, just like this! The part that is sticking out is the fixed part. You can push it back in. Like this! and this! Then it should click here. So when you push this in, if you pull it like this! to the side! then it comes out Right? That’s why when people draw guns, they hate drawing this part. Because the structure is difficult to draw. But if you draw it well, then it looks really cool! Quite awesome…! People might say “oh this guy knows how to draw some guns.”😀 There are lots of different shapes of triggers, but here (bang!) it hits the muzzle. So in this case, how to draw it cool when you look at it from the top is one two three four five No, it should be six, not five.. 😅
😅 Like I said before, this part is where the bullets come out, so if you look back here, it’s got a hole. This is the part where I said earlier. The bullets You can load the gun like this, right? Like this! To the side! It comes out. That’s why many people use these two types when drawing pistols. You can draw the muzzle short Like the old .44 Magnum or you can draw it long just like from Dirty Harry or the movie with Clint Eastwood (it doesn’t matter). What happens if the gun barrel is long? The accuracy gets higher. But then it’s heavier at the same time. The shorter it is, the easier it is to carry, but the accuracy is lower. Also the recoil is bad. Pistols are usually like this. There is a ratio. I think this angle and this angle is almost the same or it looks good if you draw the top part a little bit longer. Also depending on the shape of the gun, something like a silencer… (you can put it). And you can also put a rail and then a flash or a clip on it for newer guns. You can tune it. Magazines normally have 12 or 9 bullets, but you can also extend it. This is the easiest shape to practice drawing pistols. It’s the easiest to draw an automatic pistol. So I’m telling you, for automatic pistols Just a Snickers bar One of them~ Right? One Snickers bar. And then another one. Just tilt it a little bit! Then like I said, this part is the trigger. And then this top part, think of it as you divide it into halves The muzzle. Here is the bottom part. And here is… There is really no guns that form a right angle. Because it will get stuck when carrying it, taking it out or putting it in… So there are some parts that are carved. Like here. So that there is nothing stuck when you take the gun out or put it in. And then like I said, where the empty cartridges come out. Some guns have this big hole on the top Or some with a hole on the side.. (it’s on the other side..) (thinking about where the empty cartridges come out..) And there is a front sight and a backsight here. And a blowback here, to pull it backwards It normally has carved lines for a better grip. You know, these are the safety catch. Like a clip. This is the grip. It’s normally empty in here. But inside… There is a magazine filled with the bullets. There is a button on the side. If you press the button, the magazine slips out. This is what they usually look like. The grip part also has carved lines for a better grip. So that it doesn’t slip off your hands. This is the structure. Simply. Pistols are the easiest gun to draw. Automatic pistol. And then, if you’re like “I’m quite good at drawing~, I want to know more about pistols” Then, (you can practice) this type of revolver. If you simply look at a revolver, It’s a combination of a box and a cylinder. Think of it as marshmallow (cylinder) stuck in a box. And then a grip here You can draw it here… And then!! This is the important part. You shouldn’t make a mistake here. You just need to draw the bullet and the muzzle on the same line. If you draw it wrong, the bullet is here but the muzzle is here. Then, how are you gonna shoot the bullet? The bullet curves? That can’t be right. That’s why you should always pay attention to detail. When you draw, make sure you see exactly where the muzzle and the bullet is. Next, the top part is a front sight This bottom part is a structure part to put the bullets in and take them out. And then it’s same here (as automatic pistols). The trigger. And what goes back here? This, what do you call this, the breechblock (wrong) (it’s a hammer) (he’s confused with the hammer) This is the structure. If you make it simple. So The difference between these and automatic pistols is that the hammer of automatic pistols is not this big. It’s either small or there isn’t a hammer for most of newer guns. They don’t have that part because the technology is better. Old revolvers still have it. But the hammer for newer revolvers is getting shorter and shorter for a better portability. Or they grind it round. They don’t have it like this old style. Just like in old Western movies. With their hand.. You know Django shoots like this. You don’t shoot like that anymore. If you pull the trigger, it does that automatically. Like this for revolvers. You can apply these. The ratio is important for everything just like pistols or other types of guns You see, when you draw this length and this length It looks better when the top part is longer than this length (grip). If they’re the same length.. Well look. It doesn’t look good if this part is longer. It doesn’t look great, does it? It just looks like a toy gun, right? Isn’t this a glue gun? It looks like a glue gun. If the top part is longer and this part is a little bit shorter then it looks like a gun. Depending on the shape of the gun, like Luger pistol that the German army used, There is this type of shape and so many more. Only this part moves. Not like a blowback, just this top part moves. Some pistols have a magazine here, which I really liked. There are about 5 bullets at the front. Some pistols look like this. Pistols have developed its shape in different ways. It’s simpler and also the material is not iron or alloy like old guns, They make lots of guns using plastic. Because good materials are developed… Because there are plastic or synthetic resins that are stronger than iron or steel So they use something like this a lot. It’s a lot simpler It’s lighter and has little recoil. If you look at more future guns, it’s even more simple and they attach something. put this and put that, then it’s quantified~ You can develop it more. Like its shape. If you’re interested in weapons a lot, there is plenty of room to develop (while drawing) You can attach what you like. You can put something below~ you can even connect the muzzle and the grip~ There are some guns that stretch here and you can make it shoulder launched Or you can put the magazine here and get rid of this. put the silencer You can change a pistol into an indoor machine gun. You can draw various guns if you mix the weapons you already know!! This automatic pistol for beginners. It’s a really easy shape. And it’s better to try a revolver after practicing pistols. The shape and figure of revolver guns are hard to draw. And also you can just put the bullets from the bottom for automatic pistols But it’s different for revolvers. You have to take it out to the side and put a bullet in, put it in again and you shoot it like bang bang! That’s why it’s quite hard to draw this. Inside and shapes like this.. But if you draw it well, it looks so cool.✨ I think it would be great to think about these when you draw! Ok then what should we draw next? That’s it for today!

75 thoughts on “[자막/ENG] How to draw guns/김정기가 설명 해주는 총 그리는 법!

  1. 와….제가 그림좀 그려볼라고 다녔던 학원 그리고 책들에서도 제대로 못배웠는데 여기서 제대로 배우네요 사랑합니다

  2. 대박 ㅠㅠㅠㅠ 인물이나 여러가지 사물 그리는 노하우도 많이 올려주시길 ㅠㅠ 황송합니다….

  3. Honestly, I prefer this over the common how-to-draws out there. Not only does he show you how to draw stuff, but he also breaks it down and explain you some of the key parts and how it works so you have a clear understanding of what you're actually drawing.
    More of these tutorials please!

  4. 고마워 kim , You help me how to understand the things when i draw them and learn little bit more about them when i want to draw it, thank you one more time , and try to post much more of how to draw content, becuse you not only explain how to draw them, but also how to understand them and use that knowledge in many ways from our minds and put them on the paper. +BIGBIGRespect

  5. Why does this look so easy but is so hard

  6. omg wow i was literally looking for a tips on drawing guns but there were hardly any tutorials on the actual anatomy of guns until kim jung gi, the best artist makes this and its miracle

Leave a Reply

Your email address will not be published. Required fields are marked *